Switch, Cycle Start in Black, 643B

The Start Cycle Switch is a plastic, rocker-style switch with 3 terminals. (Replaces #7227).

• This switch is for the Mini Classic Water Distiller to start a cycle.

Please follow these instructions to install the ON/OFF Switch on the Mini-Classic. CAUTION: Always unplug the unit from its power source before performing service work.
1. Remove the top cover of the distiller by removing the screws.
2. Locate the ON/OFF Switch. Two terminals have wires connected to them.
3. You can mark each wire with tape or take a photo of the black and red wires and their positioning.
4. Remove each wire by pulling on the terminal.
5. Remove the old switch by squeezing the ends together and pushing through the front of the machine. We recommend using pliers.
6. Install the new switch into the opening and click it into place. Note: Make sure the switch is in the proper position, with “OFF” in the bottom position. You’ll know the proper position because the switch is a rocker switch and will not hold in the “Start” position. The “Start” would be the top.
7. Reattach each wire to the proper terminal of the new switch.
8. Reinstall the top cover with the screws.
9. Plug the unit into the power source and resume normal operation.