Condensing Coil, Mini Classic

Description

This is the condensing coil for the Mini Classic Water Distiller.

1.) Unscrew the 5 screws around the top of the distiller
2.) Clip the zip ties holding the old condensing coil in place
3.) Remove the old condensing coil
4.) Replace zip ties (You can bend them for easier installation)
5.) Place the new condensing coil where the old one was (make sure the steam tube is connected)
6.) Tighten the zip ties and clip the excess
7.) Place the top of the distiller back on
8.) Tighten the 5 screws around the top of the distiller
9.) You are ready to use your distiller again!